Table of Contents
Advertisement
I
NSTALLATION
EAS D
EACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint Device that set the deactivation range. The following is a list of
Checkpoint recommended switch bank settings.
All StratosH models have a connector labeled EAS In on the bottom of the unit. Metrologic has an optional EAS cable
(
52-52511x) available for purchase for connection between the Checkpoint Device and the StratosH.
MLPN
The following figure shows the location of the EAS deactivation area for the StratosH. It is important to pass the entire tag
through this area to deactivate the security tag.
28
Base Model
Checkpoint Recommended Switch Bank Settings
MS2321
SW1 & SW2 switches 1 and 6 set to ON
MS2322
SW1 & SW2 switches 1 and 6 set to ON
Figure 27. EAS Cable Connection (Bottom of StratosH)
Figure 28. EAS Deactivation Area
Advertisement
Table of Contents
