Advertisement
NOTE:
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
2. INTRODUCTION
A totally dry heat, no condensation, no gas, no fumes and no smell. Single infrared bulb allows heater's maximum temperature to be reached
quickly with a HeLeN coating to reduce glare. Highly polished aluminium reflector for maximum heat efficiency. Controlled by push-on/off
switch or via remote control (batteries not included). Ideal for industrial or domestic applications. Outdoor use only (IP55). Mounting brackets
and fixings included.
3. SPECIFICATION
Model No:.................................................... IWMH2000R.V2
Supply: ...........................................................................230V
Power: ................................................................1000/2000W
Heater Dimensions (W x D x H): ...............625 x 72 x 105mm
4. INSTALLATION
4.1.
ASSEMBLY
4.1.1.
Tools Needed:
1
Bracket
2
Screw
3
Screw
4
Nut
5
Gasket
6
Screw
4.1.2.
There are 4 'L' shaped brackets included in the kit (fig.1.1). These combine to make two mounting hinges for the heater.
fig.2
4.2.
INSTALLATION
4.2.1.
A wall mounting bracket is provide with the heater which has been specifically
designed to allow this product to be fitted to a wall or ceiling before drilling the
holders for the wall/ceiling is solid and that there are no hidden water pipes or
electric wires. The heater must be installed no less than 400 mm form side walls
and no less than 1800 mm off the floor.
WARNING! Ensure that the supply cable is well mounted and that it does not
‰
come into contact with reflector of the heater or that it does not trail into heated
area, the supply cable can be fixed to the metal mounting bracket behind heater
with plastic zip ties.
The heater must be installed at least 1.8m above the floor.
9
fig.4
© Jack Sealey Limited
Pencil
Hammer
Level
Screw Driver
Power Drill and drill bits
L Shape
4pcs
M6mm * 60mm
4pcs
M5mm * 10mm
4pcs
M6mm
2pcs
Ø6mm * 1mm
2 pcs
M6mm * 12mm
2pcs
Original Language Version
fig.1
fig.3
IWMH2000R.V2 Issue 3 (3,4) 11/06/2021
Advertisement
