3. Turn the blade cap (2) clockwise in the direction marked
LOOSEN and remove it. Turn the plastic nut (4) on the motor
shaft (6) counterclockwise and remove it.
4. Insert the rear cover (5) onto the motor shaft (6) making sure
the handle (7) is on the outside and positioned at the top.
Replace the plastic nut (4) onto the motor shaft (6) and turn it
clockwise. Do not overtighten it.
WSFSB1601BU_Pedestal Fan_2L.indd 11
WSFSB1601BU_Pedestal Fan_2L.indd 11
HOW TO USE
EN
11
11/3/2021 4:56:12 PM
11/3/2021 4:56:12 PM