Steps
1. Align the solid-state drive bracket to accommodate the M.2 2230 solid-state drive.
2. Replace the single (M2x3) screw to secure the solid-state drive module to the palm-rest and keyboard assembly.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Removing the thermal support bracket
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the SSD-2.
About this task
The figure provides a visual representation on how to remove a thermal support bracket.
30
Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.