Steps
1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system
board.
2. In sequential order (as indicated on the heat sink), tighten the four captive screws (M2x3) that secure the heat sink to the
system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
System fan
Removing the system fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The figure indicates the location of the system fan and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
39