Removing The Support Bracket - Dell INSPIRON 531S Owner's Manual

3 Remove the two screws securing the cover, using a flat-blade screwdriver.
1
1 computer cover
4 Release the computer cover by pulling it away from the front of the
computer and lifting it up.
5 Set the cover aside in a secure location.

Removing the Support Bracket

CAUTION:
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 101.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 103).
3 Release the card retention bracket by lifting the card retention release lever up.
104
Removing and Installing Parts
Before you begin any of the procedures in this section, follow the
2 screws (2)
2