Changing Banks - The GigRig G3 User Manual

THE ADVANCED SWITCHING SYSTEM

4.3 CHANGING BANKS

You can access G3's 99 Banks in one of three ways:
2. Back Panel Bank Remote - connect the GigRig Bank Manager or any momentary
switch to the back-panel bank socket to access G3 banks (this needs to be activated
in the Deep Edit Menu under Global Settings). Again, press the Bank switch once to
go up, press and hold to go down.
Footswitch Assign - assign your bank control to a G3 footswitch. In the Deep Edit Menu, in Global
3.
Settings, you have the option to assign the Bank Select switch to a G3 footswitch. Once done,
simply tap the footswitch to go up a Bank or press and hold to go down a Bank.
Remember, the 99 banks are accessed through a single footswitch.
Press and release – The Bank numbers go up
Press and hold – The Bank numbers go down
THE GIGRIG G3 USER MANUAL
1. The 'Bank Select' push button on the top
panel. Pressing it once will scroll up the
Banks and pressing and holding will scroll
down the Banks. (Please note that
whichever preset you are on you will stay
on until you have selected a new preset in
your newly chosen bank).
13