The GigRig Wetter Box Quick Start Manual

OUT LEFT
This is your standard MONO output
It can connect to either your amp, or
your amps FX LOOP RETURN
LOOP B
Insert your B pedal here
This can be either a
standard mono pedal or
a stereo pedal
For stereo effects use a
TRS cable
D.C. INPUT -
INPUT: MONO - STEREO
Select MONO for normal operation
For STEREO input use TRS cable
REMOTE SWITCH INPUT
Use any latching 1/4"
switch for REMOTE
switching
EXP PEDAL INPUT
Control your mix/blend in real time
with an expression pedal such as
the purpose made WBX-1
Uses a standard 2.1mm centre negative connector (Current draw - 175mA)
Wetter Box QuickStart Guide
OUT RIGHT
The right output is
only active when
using stereo effects
MIX/BLEND
Switch between MIX
mode (A+B) or
BLEND mode (A<>B)
PHASE LOOP B
Flips the relative
PHASE in LOOP B
GAIN CONTROLS
Adjust level on the
LOOP returns
LOOP A
Insert your A pedal here
Leave this loop empty
and A becomes your
direct sound
To use stereo effects use
TRS cables here. Stereo
effects can be MONO
send STEREO return, or
STEREO send and
STEREO return
INPUT
Connect your guitar
signal or your amps
FX LOOP SEND here
Use standard cable
for MONO or TRS for
STEREO