Expression Pedal Midi; Midi Clock - The GigRig G3 User Manual

THE ADVANCED SWITCHING SYSTEM
For example, if you want to programme channel 7 and would like Preset Number 1 on G3 to send MIDI
programme 7 on MIDI channel 3, you will need to:
a. Select a MIDI command (1-15).
b. Edit MIDI Channel (in this instance, to MIDI channel 3).
c. Set Type to PC.
d. Set Value to 7.
e. Press DEEP EDIT. Push button 3 to exit.
You can repeat this process up to 15 separate times per individual preset.
To Set Up Control Change (CC) Messages:

EXPRESSION PEDAL MIDI

This is the same procedure as above:
Select Expression Pedal from the MIDI Type list.
Choose the CHANNEL number and the CONTROL number.
Scroll right and choose the HEEL down position number and the TOE down
position number.

MIDI CLOCK

G3's MIDI CLOCK enables you to send a MIDI clock message that can sync all
your clock input enabled, time-based effects. You can send the MIDI clock out
on all MIDI channels.
THE GIGRIG G3 USER MANUAL
a. Select a MIDI command (in this example, MIDI command 2 is selected)
b. Scroll right to set Type to 'CC'
c. Scroll right again to set VALUE and NUMBER.
There are two expression pedal inputs in G3 so you have the choice of which
expression pedal you want to use to send your EXP commands.
16