Table of Contents
Advertisement
THE ADVANCED SWITCHING SYSTEM
5.2.5 STOMPBOX
– See Section 4.2
5.2.6 TRAILS
THE GIGRIG G3 USER MANUAL
The numbers will change positions to reflect the order chosen.
To activate TRAILS on a preset:
a. Select the preset you want your Reverb and Delay Trails to spill-over onto.
b. Go to TRAILS in the menu.
c. Scroll right and turn on TRAILS for the preset.
d. Select the loop(s) that contain Delay and/or Reverb, to enable the spill-over
function for these pedals.
Remember, you set up Trails on the preset you are going to, not the preset
that you have come from.
18
Advertisement
Table of Contents
