Fanimation Old Havana FPH210 Owner's Manual page 10

How to Assemble Your Floor / Desk Accessory Fan
Tool Needed for Assembly
• ½˝ Adjustable Wrench
Unpacking Instructions for the Floor / Desk Accessory
▲WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only
those parts supplied with this product and/or any
accessories designated specifically for use with
this product by Fanimation.
or accessories not designated for use with this
product by Fanimation could result in personal injury
or property damage. Contact your retail store for
missing or damaged parts.
1. Remove Floor / Desk base from carton.
2. Check to see that you have received the fol low ing
parts:
• Floor / Desk Base
• Standard Hardware Bag
1. 5/16˝-18 x 2½˝ Bolt
2. 5/16˝ Flat Washers (3)
3. Special Hex Bolt
4. 5/16˝-18 x 1½˝ Bolt (for use with Pedestal Acc.)
NOTE: If you are uncertain of part de scrip tion, refer to
exploded view illustration. (page 18)
NOTE: Place the parts from the Hardware Bag in a
small container to keep them from getting lost. If any
parts are missing, contact your local retailer.
Substitution of parts
Hardware bag
Upper Inner
Packaging
Carton
8
Floor /
Desk Base
Lower Inner
Packaging
Fig. 12