Download Print this page

Fanimation Palisade FP240 Series Specification Sheet page 2

Fanimation palisade fp240 ceiling fans: specifications
Hide thumbs Also See for Palisade FP240 Series:

Advertisement

The Palisade
5¾˝dia
4˝ w/24˝ EP
w/18˝ Blade
A
40° Blade Pitch
18˝ Blade = 64˝
22˝ Blade = 68˝
Net Hanging Weight: 53 lbs
INSTALLATION REQUIREMENTS:
Ceiling fan is secured to a structural member such as a ceiling joist and must be capable of withstanding a load of at least
100 pounds. A
3
/
˝ x 5˝ long lag bolt passes through the loop of the ceiling support cable, hanger bracket plate, the outlet
8
box and into the wood member above.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. Two motors per fan: 120
VAC, 60 Hz, 0.90 amps (each motor). [Single-speed (no control) 220 VAC, 50 Hz version available
FAN SPEEDS:
High – 50 rpm; Low – 30 rpm
DESIGN FEATURES:
Redesigned to assure stability, convenient assembly and easier installation. The Palisade
adaptable (see control option below).
CONTROL OPTIONS:
1. Wall control (C3) supplied with fan. Instructions provided with control.
2. Optional fan & light remote control receiver unit (SW24) is available, to be used in conjunction with: C24 hand-held
remote control and/or C25 wall-mount remote control. Instructions provided with each control.
LIGHTING OPTIONS:
Optional lighting fi tters and light kits are available, including a single bowl fi xture with a maximum of 180 watts and a
variety of four-light fi xtures with a maximum of 240 watts. See catalog or visit our website, www.fanimation.com for more
lighting options.
BLADE OPTIONS:
Various Palm, Bamboo, and Wood blades are sold separately. See catalog or visit our website, www.fanimation.com for
more blade selections.
ACCESSORY OPTIONS:
Various optional accessories are available. Optional sloped ceiling ball kits (SCB52) are available for up to 52°. See
catalog or visit our website, www.fanimation.com for more information.
Copyright 2008 Fanimation, Inc.
Fan Assembly – FP240**
®
Ceiling
Blade Sweep
18˝ Blade = 44˝
22˝ Blade = 52˝
7´ min
Floor
Dimensions shown in inches
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free (888) 567-2055
FAX (866) 482-5215
Outside U.S. call (317) 733-4113
Visit Our Website www.fanimation.com
Available Finishes
AB
Antique Brass
OB
Oil-Rubbed Bronze (Damp)
PW Pewter
RS
Rust (Damp)
Component Weights
Motor Assembly Unit (2)
Horizontal Tube Assembly
Blade Set (8)
Extension Pole
Sold Separately
Distance from Ceiling to
Bottom of Blades
*24˝ Pole w/18˝ Palm Blades
30˝ Pole w/22˝ Palm Blades
36˝ Pole w/22˝ Palm Blades
48˝ Pole w/22˝ Palm Blades
60˝ Pole w/22˝ Palm Blades
14 lbs
72˝ Pole w/22˝ Palm Blades
5 lbs
* 24˝ Extension Pole may be used
with 18˝ blades only
3-5 lbs
* Can be mounted on a sloped
1 lb/ft
ceiling up to 45°
fan is now remote control
®
A
51˝
61˝
67˝
79˝
91˝
103˝
2008/06

Advertisement

loading