Dust cup set
Optional accessory
For Models HR3011FC, HR3001C
NOTICE:
When using the dust cup set in
HR3011FC, HR3001C, the spacer is also requied.
Before installing the dust cup set, remove the bit from
the tool if installed.
Attach the spacer to the dust cup set.
dust cup is aligned with the groove in the spacer.
1
► 1. Spacer 2.
symbol 3. Groove
Install the dust cup set with the spacer on the tool so
that the
symbol on the dust cup is aligned with the
groove in the tool.
► 1.
symbol 2. Groove
To remove the dust cup set, remove the bit while pulling
the chuck cover in the direction of the arrow.
symbol on the
2
► 1. Bit 2. Chuck cover
Hold the spacer and pull it out.
3
For Model HR3012FC
Before installing the dust cup set, remove the bit from
the tool if installed.
Install the dust cup set on the tool so that the
bol on the dust cup is aligned with the groove in the tool.
1 1 1
2
► 1.
10 ENGLISH
1
2
symbol 2. Groove
sym-
1 1 1
2