Battery Replacement - Timeguard IRRDALI Installation & Operating Instructions Manual

All manuals and user guides at all-guides.com
4.12 Semi-auto Mode
• Press this button to enter Semi-Auto
Mode.
• An initial manual-on input is required
to turn ON the connected load.
After that the sensor will operate as under
Auto Mode, and will return to Semi-Auto
Mode after the delay time ends and the
load turns OFF.

5. Battery Replacement

• Lever out the battery holder located
at the bottom of the remote control,
8
using a small flat head screwdriver.
• Remove the old battery.
• Insert the new battery making sure
it is the right way up, and then push
the battery holder back into place.