Timeguard IRRDALI Installation & Operating Instructions Manual page 8

All manuals and user guides at all-guides.com
4.10 ON/OFF Mode
• Press this button to enter 10hr-ON mode
or 10hr-OFF mode (the load will remain
ON or OFF for 10 hours).
• The Auto Mode will resume after the
10 hour delay time is over.
• During the 10 hr time delay, press the
AUTO button or the SEMI AUTO button
to exit the 10 hour ON/OFF Mode.
4.11Teach-in Mode
7
• Press this button to enter Teach-in Mode
at the desired ambient light level.
• The sensor LED indicator will flash for
10 seconds while learning the ambient
light level.
• After the 10 second 'learning' duration,
the sensor LED indicator (and the load)
will stay ON for 3 seconds and go off
again, meaning the process is complete.
• The learned light level is now accepted
as the new switching value.