Salt Storage - Samsung DW50R4070F Series User Manual

Before you start

Salt storage

CAUTION
• Use dishwasher-specific salt only. Do not use any other type of salt or solvent. This may
damage the salt storage and the water softening system.
• To prevent corrosion due to an excessive amount of salt or salty water, always fill the
salt storage immediately before a washing cycle gets started.
Filling the salt storage
Salt indicator
The indicator (
30 English
DW4000RM_DD81-03019B-00_EN.indd 30
) turns on if there is not enough salt for the next several cycles.
1. Open the door.
2. Turn the cap counterclockwise to open.
3. Fill the salt storage with water (only
required when using the dishwasher for
the first time).
4. Apply dishwasher salt.
CAUTION
• The maximum capacity is about 1 kg. Do
not exceed the capacity.
• Exceeding the capacity may affect the
dishwasher performance.
5. Turn the cap clockwise to close.
NOTE
• To clean salt or salt water from
dishwasher, run the Quick cycle.
• Depending on the size of the salt grains,
it may take a while for the salt to
dissolve and the indicator (
off.
) to turn
9/4/2020 11:22:40 AM