hepco & becker 502908 00 01 Manual

Engine guard for bmw r 1150 gs 2000-2004 bmw r 1150 gs adventure 2000-2004

Advertisement

Motorschutzbügel/ Engine guard
BMW R 1150 GS
2000-2004
Artikel Nr.: / Item-no.:
908
502
00 01
908
502
00 02
908
502
00 09
INHALT
CONTENT
1x Motorschutzbügel links
1x Motorschutzbügel rechts
1x Schraubensatz:
4x Zylinderschraube M10x65
1x Zylinderschraube M8x25
2x Aludistanz Ø18xØ11x12
1x Aludistanz Ø18xØ11x20
1x Aludistanz Ø18xØ11x17
4x U-Scheibe Ø10,5
2x U-Scheibe Ø8,4
1x Selbstsichernde Mutter M8
WICHTIG
IMPORTANT
Beachten Sie die in Ihrem Land geltenden Zulassungsbestimmungen.
Für den Bereich der BRD gilt: Ein Eintrag in die Fahrzeugpapiere ist nicht erforderlich.
Die Voraussetzung für die Montage ist natürlich eine gewisse technische Erfahrung. Wenn Sie sich nicht sicher sind,wie
man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen.
Ziehen sie alle zugänglichen Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann auf
das entsprechende Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt spannungsfrei angebaut ist.
Anzugsmomente beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
Of course, the assembly requires a certain technical experience. If you are not sure how to execute a determined action,
you should ask your local distributor to do it. First, tighten all screws only loosely. After mounting all parts, the screws
should be tightened to the torque specifi ed. This guarantees, that the product is mounted without tension. Observe
the tightening torques of the manufacturer! Control all screw connections after the assembling for tightness!
VORBEREITUNG

PREPARING

Sitzbank abnehmen. Die seitliche Kunststoffverkleidung demontieren.
Danach den Tank lösen und etwas nach hinten schieben.
Remove the seat. Remove the plastic side cover.
Then loosen the tank and push it a little bit backwards.
BENÖTIGTE WERKZEUGE

TOOLS REQUIRED

BMW R 1150 GS Adventure
2000-2004
Artikel Nr.: / Item-no.:
502
schwarz/black
502
chrom/chrome
502
silber/silver
Set
915
00 01
schwarz/black
915
00 02
chrom/chrome
915
00 09
silber/silver
1x Engine guard left
1x Engine guard right
1x Screw kit:
4x Allen screw M10x65
1x Allen screw M8x25
2x Alu spacer Ø18xØ11x12
1x Alu spacer Ø18xØ11x20
1x Alu spacer Ø18xØ11x17
4x Washer Ø10,5
2x Washer Ø8,4
1x Self lock nut M8
Verlängerung/extension
Ratsche/Ratchet
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 502908 00 01 and is the answer not in the manual?

Questions and answers

Summary of Contents for hepco & becker 502908 00 01

  • Page 1 Motorschutzbügel/ Engine guard BMW R 1150 GS BMW R 1150 GS Adventure 2000-2004 2000-2004 Artikel Nr.: / Item-no.: Artikel Nr.: / Item-no.: 00 01 00 01 schwarz/black schwarz/black 00 02 00 02 chrom/chrome chrom/chrome 00 09 00 09 silber/silver silber/silver INHALT CONTENT 1x Motorschutzbügel links...
  • Page 2 MONTAGEANLEITUNG MOUNTING INSTRUCTIONS Befestigung des Schutzbügels vorne oben A Zwischen die Rohrstreben der Frontverklei- dung und dem Rahmen schieben und mit den Originalschrauben befestigen. Fastening the crash bar front top A Slide between the tube struts of the front fairing and the frame and fasten with the original screws.
  • Page 3 MONTAGEANLEITUNG MOUNTING INSTRUCTIONS Befestigung des Schutzbügels vorne unten D 1x Zylinderschraube M8x25 2x U-Scheibe Ø8,4 1x Selbstsichernde Mutter M8 Fastening the crash bar front bottom D 1x Allen screw M8x25 2x Washer Ø8,4 1x Self lock nut M8 ACHTUNG CAUTION Den Motorschutzbügel im Bereich der Langlöcher soweit wie möglich nach oben schieben, so daß...

This manual is also suitable for:

502908 00 02502908 00 09502915 00 01502915 00 02502915 00 094042545503321 ... Show all

Table of Contents