Fanimation Andover FP5220 Series Owner's Manual page 10

Installing the Light Kit Assembly (cont'd)
4. Securely attach Downlight Socket Plate Assembly to the
Adapter Plate by tightening three screws provided with the
fan. (Figure 4)
5. Install three Candelabra Bulbs (not included - 40 watts
max) in each of the sockets on the Downlight Socket Plate
Assembly. (Figure 5)
IMPORTANT
40 watt bulbs are the maximum wattage allowed to safely
operate the fan.
6. Carefully install the Glass/Frame Light Kit Assembly into
the Adapters' slots. (Figure 6)
10
Figure 4
Figure 5
Figure 6