External Cleaning; Prolonged Periods Of Non-Operation; Frost Precautions; Moving The Machine - Zanussi ZT 6910 Instruction Book

Hide thumbs Also See for ZT 6910:
Table of Contents

Advertisement

Check that the SID is not clogged with detergent
residue. If necessary rinse it under running water
after having removed it from the basket by twisting it
anticlockwise and pulling it upwards.
Fasten it back onto the support by turning it
clockwise.
Never use your dishwasher without the
SID dispenser.
Since SID also ensures correct distribution
of the water to the upper spray arm,
running the dishwasher without it will
impair the washing results.

External cleaning

Clean the external surfaces of the machine and
control panel with a damp soft cloth. If necessary
use only neutral detergents. Never use abrasive
products, scouring pads or solvent (acetone,
trichloroethylene etc....).
Prolonged periods of non-
operation
If you are not using the machine for any period
of time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of
any unpleasant smells.
4. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable,
empty the machine, close the appliance door,
disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
All manuals and user guides at all-guides.com
18
MA12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents