Zanussi ZT 6910 Instruction Book page 16

8. To cancel a programme in
progress
Open the door and press the "CANCEL" push
button.
A audible signal informs you that the
programme under way has been cancelled, 3
horizontal lines (---) will appear in the digital
display (for about 2 seconds), then the number
of the last selected programme will appear.
The dishwasher has now returned to setting
mode and it is now possible to select a new
washing programme.
To stop a countdown in progress, open the
door and press the "CANCEL" push button, in
the digital display appears the number
corresponding to the selected programme.
The countdown has been cancelled but the
setting of the programme with eventual options
remains memorised.
9. At the end of the washing
programme
The dishwasher will automatically stop and
an intermittent audible signal will sound
when the programme has ended (with the
delay start the audible signal is automatically
excluded).
All indicator lights turn off and 3 flashing
horizontal lines will appear in the digital
display.
Wait a 15/20 minutes before opening the
dishwasher's door; in this way you will avoid to
burn yourself removing the dishes and avoid
also the damage of the nearby furniture caused
by the escape of steam.
Open the door and switch off the dishwasher
by pressing the ON-OFF push button.
Empty the lower basket first and then the upper
one; this will avoid water dripping from the
upper basket onto the dishes in the lower one.
All manuals and user guides at all-guides.com
16
Important!
In general it is not advisable to open the
door while the machine is working; if the
door is opened however, a safety device
ensures that the machine stops.
Care must be taken if the door is opened
during the hot phase or immediately after
a programme has finished, as steam may
escape.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.