Disc Formats; Loading And Ejecting Discs; Figure 31. Ejecting The Disc Tray - Teac CD-RW5120I User Manual

Firewire (ieee 1394) cd-rw drive

Hide thumbs Also See for CD-RW5120I:

Table of Contents

All manuals and user guides at all-guides.com

Disc Formats

The TEAC FireWire CD-RW drive supports the following disc formats:

Disc Format

CD-DA

CD-ROM Mode 1

CD-ROM XA Mode 2 (Form 1)

CD-ROM XA Mode 2 (Form 2)

CD-R

CD-RW

CD-I

Video-CD

CD Extra/CD-Plus

CD-TEXT

Multi-session Photo CD

To load a disc, first open the disc tray by pressing the Eject button on the front of

the drive. Place the disc on the disc tray with its label side facing up. Then press

the Eject button again to retract the disc tray back into the drive.

To eject a disc, press the Eject button on the front of the drive to extend the disc

tray (see Figure 31). Remove the disc from the disc tray and place it in its

protective case. Press the Eject button again to retract the disc tray back into the

drive.

Data Capacity

74 or 80 minutes

650MB or 700MB

738MB or 794MB

650MB or 700MB

Press the Eject button

to extend and retract

the disc tray.

TEAC FireWire CD-RW Drive User's Manual

Table of Contents