Maintenance; Troubleshooting; Specifications - Panasonic AW-RM50AG Operating Instructions Manual

Maintenance

• Wipe the surfaces using a soft dry cloth. Avoid all contact with benzene, paint thinners and other volatile
substances, and avoid using these substances. Otherwise, the casing may become discolored.

Troubleshooting

Cannot operate the camera using the unit
p p Has the operation of the wireless remote controller been
set to "disable" at the camera?
p p Have the unit's batteries run down or have the batteries
been installed with their polarities reversed?
 If the camera cannot be operated unless the remote
controller is brought closer to the camera's light-sensing
area, it means that the remaining charge of the batteries
is low.
Replace the batteries.
p p Is a fluorescent light, the light from a plasma monitor or
sunlight shining on the camera's light-sensing area?
p p Have the IR ID switches been set correctly on the
camera?

Specifications

Power supply:
indicates safety information.
Camera supported:
Operable range:
Battery life span:
Dimensions (W  H  L):
Mass:
(8)
Cause and remedial action
DC 3 V (2 size "AA" dry batteries: sold separately)
Integrated camera (remote camera)
Approx. 10 m (32.8 ft.) (when the unit is pointed straight at one of the
signal light-sensing areas)
Approx. 1.5 years (varies depending on how frequently the unit is used)
53.0 mm  27.3 mm  200.0 mm (2-3/32˝  1-1/16˝  7-7/8˝)
Approx. 92 g (0.20 lbs.) [excluding dry batteries]
Reference pages
Page 7
Page 6
Page 7
Page 7