Rear Brake Pedal; Shift Pedal - Benelli 249R Manual

SOFTER SOFTER
STIFFER STIFFER
Adjusting nut Adjusting nut
Locknut
TORQUE VALUE
Upper fixing bolt: 37-44N.m
Lower fixing bolt: 22-29N.m
Adjustable

REAR BRAKE PEDAL

Step the rear brake pedal to brake the rear wheel.
Brake light will turn on while rear brake is in use.
Rear Brake Pedal

SHIFT PEDAL

1
Slow down the vehicle
N 6
when turning to the low
gear. Revving up the
engine slightly to shift
2
5
gears in more smooth
way to avoid damaging
gears.
3 4
PRE-OPERATION CHECKS
Inspect your vehicle each time you use it to make
sure the vehicle is in safe operating condition.
Always follow the inspection and maintenance pro-
cedures and schedules described in the Owner's
Manual.
!
WARNING
Failure to inspect or maintain the vehicle prop-
erly increases the possibility of an accident or
equipment damage. Do not operate the vehicle if
you find any problem. If a problem cannot be
corrected by the procedures provided in this
manual, have the vehicle inspected by a dealer.
Before using this vehicle, check the following points:
ITEM CHECKS
Fuel • Check fuel level in fuel tank.
• Refuel if necessary.
• Check fuel line for leakage
• Check oil level in engine.
Engine oil
• If necessary, add recommended oil
to specified level.
• Check vehicle for oil leakage.
ITEM CHECKS
Disc brake • Check operation.
( If equipped ) • If soft or spongy, have dealer bleed
hydraulic system.
• Check brake pads for wear. Replace
if necessary.
• Check fluid level in reservoir. If
necessary, add recommended brake
fluid to specified level.
• Check hydraulic system for leakage.
Drum brake • Check operation.
( If equipped ) • Check brake shoes for wear. Replace
if necessary.
Throttle grip • Make sure that operation is smooth.
• Check cable free play.
• If necessary, have a dealer adjust
cable free play and lubricate cable
and grip housing.
Clutch lever • Make sure that operation is smooth.
• Check cable free play.
• If necessary, have a dealer adjust
cable free play and lubricate cable.
13 - 14