GDMANiFUN16-1G Version 0010 PAGE: 3 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
Page 4
GDMANiFUN16-1G Version 0010 PAGE: 4 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
Page 5
Roll rate at 120% V min. (45°/45°) GDMANiFUN16-1G Version 0010 PAGE: 5 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
Roll rate at 120% V min. (45°/45°) GDMANiFUN16-1G Version 0010 PAGE: 6 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
Vman. VNE should only be reached in smooth conditions. GDMANiFUN16-1G Version 0010 PAGE: 11 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
Page 12
GDMANiFUN16-1G Version 0010 PAGE: 12 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
The batten shape is intrinsic to stability, stall behavior and handling. Some aircraft require batten shape adjustment to correct for turns. This is not necessary for Air Creation wings. The tuning of a flexwing requires special training and regular practice. We offer hereunder global effect of the main means of tuning, but their application is delicate.
Page 14
(20 mm). The minimum allowed is 15 turns (15mm) of total tension. GDMANiFUN16-1G Version 0010 PAGE: 14 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
Page 15
The cruising speeds will not change, but handling in roll will be slightly reduced, while aerodynamic performance will be improved. GDMANiFUN16-1G Version 0010 PAGE: 15 AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France Tél.: 33 (0) 4 75 93 66 66 - Fax: 33 (0) 4 75 35 04 03 - Internet: www.aircreation.fr...
Page 16
The correct assembly of the wing is critical for safety and performance. If you have any doubts as to the correct procedure for assembly after shipping, please contact the Air Creation factory. Remove wing from box. Take care that no staple damages the bag or the sail during this operation.
The fatigue life of these components is dependent upon rigid adherence to maintenance schedules. Air Creation will from time to time amend these maintenance checks as the service history of the aircraft evolves. It is the responsibility of the pilot to ensure compliance with new directives. (Information is available on the website http://www.aircreation.fr).
Need help?
Do you have a question about the iFUN 16 and is the answer not in the manual?
Questions and answers