Tie-Down Locations; Motor Box Assembly - Cobalt Digital Inc 200S Owner's Manual

TIE-DOWN LOCATIONS

2
2
2
3
1 – Bow Eye
2 – Cleats
3 – Stern Eyes
A
WARNING
Avoid injury, death or property damage.
Never anchor a boat from the stern, and
keep the boat headed into the waves.
200S Owner's Manual
O
PERATING
1
2
2
2
3
COB_0001_A
3 37
-
I
NFORMATION
NOTICE: Only use properly
positioned slings to lift your
boat. Do not use deck cleats to
anchor or for towing. If towing,
only use the bow eye or the
stern eyes in a bridle manner.
Tie-down locations are for keeping your Cobalt boat
secured when moored. The bow eye and/or stern
eyes can also be used. Refer to Section 3,
Anchoring.

MOTOR BOX ASSEMBLY

A
DANGER
Avoid injury or death. DO NOT occupy or
operate an engine when the motor box is
open. The motor box assembly is a
machinery guard.
CAUTION
Avoid injury or damage to your boat. The
motor cover is heavy and may require
more than one person to lift it manually.
If lifting the box manually, position one
person at each grab handle and lift
straight up. Place support into position.
Before opening the motor box, make sure no items
are on top of the motor box and any cushions,
inserts or stored equipment are secure or removed.
Make sure all obstructions are cleared before
closing the box. Wind and conditions may allow the
motor box to open beyond its limits; use caution
during these conditions.