Charge The Battery - Bosch Smart System Quick Start Manual

Bosch smart system
1
2
3
5

Charge the battery

• The battery is supplied partially charged. For best performance, fully charge the battery before
riding your e-bike.
• The battery can be charged while installed on the bike or off the bike.
• LEDs indicate the level of battery charge.
• While the battery is charging, the top LED on the remote and the LEDs on the battery will flash.
On the bike
Charge
Each blue = 20%
Each white = 10%
Example
4 blue LEDs
+ 1 white LED
= 81 % to 90% charged
Be safe. Follow these safety warnings when charging your battery:
• Only charge the battery with a Bosch smart system charger. Using the wrong charger risks the life
of the battery and presents a potential fire hazard.
• Only use the charger in dry, indoor areas.
• Do not leave a charging battery unattended.
• When the battery is fully charged, disconnect the charger from the battery and wall socket.
EN-2
Remote
1
Display
2
Battery
3
4
Charger
4
Drive unit
5
Off the bike
LEDs flash while battery
is charging. All LEDs
will be lit when fully
charged.
100%
80%
60%
40%
20%