Removing The Cover - GB IDAN Manual

REMovING tHE covER

The cover consists of 6 parts: 1 shell
cover, 1 headrest cover, 2 shoulder
pads, 1 new-born inlay and 1 belt
buckle pad. To remove, please apply
the following procedure:
• Undo the belt buckle.
• Remove the new-born inlay.
• Remove both shoulder pads from
the belt.
• Undo both pressbuttons, which
are located between headrest
cover and shell cover and pull the
headrest cover over the headrest
without damaging the protective
foams underneath.
• Thread the shoulder belts with
the buckle tongues out of the
headrest cover.
77