Advertisement
®
AquaTRAM
Attach Seat belt to the seat as shown.
1.
Install the AquaTRAM 90 Swimming Pool
2.
Access Lift into the anchor location on the
concrete pad.
Plug the handset cable into the large handset
3.
socket on the bottom of the control box. Be
sure you press the cord end firmly into the
socket until you are sure it is all of the way into
the socket. Failure to fully push the remote cord
into the socket may result in faulty or
interrupted operation.
4. Before installing the battery, place it on the
charging unit and let it charge for 24 hours.
Make sure the orange "charge" light illuminates
when the battery is being charged.
Remove the fully-charged battery from the charger and install it on top of the
5.
Control Box. The battery will line up square with the control box, and will
'click' when it locks in place properly. The lift will only operate when the
battery is mounted properly.
WHEN NOT IN USE STORE THE BATTERY ON THE CHARGER. DO NOT
LEAVE THE BATTERY ON THE LIFT WHEN NOT IN USE!
90 - ASSEMBLY INSTRUCTIONS
9
Advertisement
