Yealink CTP18 Quick Start Manual
Collaboration touch panel
Hide thumbs
Also See for CTP18:
- Quick start manual (24 pages) ,
- User manual (20 pages) ,
- Manual (7 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Yealink CTP18
Summary of Contents for Yealink CTP18
- Page 1 English | 简体中文 Quick Start Guide (V1.0) www.yealink.com...
- Page 2 Make sure of the connectivity between the CTP18 and endpoint. Otherwise, the CTP18 may not work properly. You can also connect the CTP18 to the VCM34, and then connect to the power and wired network. If the VC Hub/Phone port of the endpoint is used, you can connect the CTP18 to the PoE switch for power supply and connect to the wireless access point provided by the endpoint.
- Page 3 Assemble your CTP18 CTP18 Installation Put on a table You can place the system on the conference room table and adjust the touch screen as you need. 28° 50°...
- Page 4 Mount on a Wall 100mm If the conference room environment allows, you can also route the CTP18 through the wall. Start to Use the CTP18 After connected to the power and network, the CTP18 starts automatically. The CTP18 synchronizes the configurations from the endpoint and goes to the Home page.