Subscribe to Our Youtube Channel
Related Manuals for Yealink MTouchPlus-EXT
Summary of Contents for Yealink MTouchPlus-EXT
- Page 1 MTouchPlus-EXT Installation MTouchPlus-EXT Installation MTouchPlus-EXT Installation Package Contents Package Contents...
- Page 2 MTouchPlus-EXT Installation...
- Page 3 - Connect your MTouchPlus-EXT - Connect your MTouchPlus-EXT NOTE NOTE 1. MTouchPlus-EXT needs to be connected to the same LAN as MTouch Plus. 2. You can directly power MTouchPlus-EXT by using a PoE switch in the same LAN as MTouchPlus.
- Page 4 Enter the MTouch Plus IP address and PIN code according to the on-screen prompts in the MTouchPlus-EXT, then the system will be automatically paired with the MTouchPlus-EXT TIP Go to Device Status > IP in Yealink RoomConnect, you can obtain the IP of MTouch Plus. Table Installation Table Installation...
-
Page 5: Wall Installation
MTouchPlus-EXT Installation Wall Installation Wall Installation We recommend that the height of the wall installation is 1m~1.5m from the ground. Please select the outlet hole according to your needs. If the conference room environment allows, you can also wire through the wall. - Page 6 MTouchPlus-EXT Installation Deployment Deployment There are two deployment methods to power the MTouch Plus-EXT. There are two deployment methods to power the MTouch Plus-EXT. 1. Deployment using the PoE power supply PoE power supply included in the package a) Use a network cable to connect the Network port...
- Page 7 MTouchPlus-EXT Installation b) Use a network cable to connect the Ethernet IN Ethernet IN interface of the PoE power supply PoE power supply to the LAN. c) Use a network cable to connect the Ext Touch port Ext Touch port of the MTouch Plus under the same LAN.
- Page 8 MTouchPlus-EXT Installation a) Use a network cable to connect the Network port Network port of the MTouch Plus-EXT to the PoE switch. b) Use a network cable to connect the Ext Touch Ext Touch port port of the MTouch Plus to the same LAN as the MTouch Plus- ...
- Page 9 MTouchPlus-EXT Installation 4. Click Room Controls - Status on the MTouch Plus and note the IP address of the MTouch Plus. NOTE NOTE If the above is done correctly, the IP address of the MTouch Plus-EXT and the IP address of the MTouch Plus should be on the same network segment, i.e., the first three digits should be the same.
Need help?
Do you have a question about the MTouchPlus-EXT and is the answer not in the manual?
Questions and answers
is there usb c port in mtouch plus-ext for content sharing?
Yes, the Yealink MTouchPlus-EXT has a USB 2.0 Type-C port for content sharing.
This answer is automatically generated