Monitor Installation; Installation Procedure - Philips PS27QHDCR User Manual

2. MONITOR INSTALLATION

W
ARNING
complete setup must be tested before taking into operation.
2.1

Installation procedure

Remove cable cover
To get access to the connectors, the cable cover should be removed.
1. Grab the middle bottom of the cable cover and pull it away from the monitor.
Image 2-1
Earth monitor
1. Optionally: For additional grounding, earth the monitor by connecting the protective earth pin to a
grounded outlet by means of a wire with at minimum AWG18 size (according to national Regulation re-
quirements regarding maximum admitted cable length). Use the included M4 screw to attach the wire
to the protective earth pin.
Image 2-2
K5902097 (451920611672) PS27QHDCR 22/05/2015
:
Sufficient expertise is required to install this equipment. All devices and
2. Monitor installation
M4
5