Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha F225 Owner's Manual

ECM00991
CAUTION:
Before tilting the outboard motor, follow
G
the procedure under "Stopping engine"
in this chapter. Never tilt the outboard
motor while the engine is running. Se-
vere damage from overheating can re-
sult.
To prevent the cooling water passages
G
from becoming frozen when the ambient
temperature is 5°C or below, tilt the out-
board motor up after it has been
stopped 30 seconds or more.
EMU32722
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever in neutral.
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted up
completely.
UP
N
ZMU04588
ZMU04194
UP
3. Pull the tilt support lever toward you to
support the engine.
"
Operation
ZMU04602
49