Main Switch; Power Trim And Tilt Switch On Remote Control - Yamaha F225 Owner's Manual

1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
3. Engine shut-off switch
EMU26090

Main switch

The main switch controls the ignition system;
its operation is described below.
" " (off)
G
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
" " (on)
G
With the main switch in the "
the electrical circuits are on, and the key can-
not be removed.
" " (start)
G
2
1
ZMU04565
ON ON
OFF START OFF START
3
2
1
ZMU05818
" (off) posi-
" (on) position,
Basic components
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
OFF
3
OFF
EMU32051
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the out-
board motor angle in relation to the transom.
Pressing the switch "
board motor up, and then tilts it up. Pressing
the switch "
down and trims it down. When the switch is re-
leased, the outboard motor will stop in its cur-
rent position.
NOTE:
For instructions on using the power trim and
tilt switch, see pages 46 and 48.
" (on) position.
ON
START
ON ON
START OFF START
" (up) trims the out-
" (down) tilts the outboard motor
" (start) po-
ZMU04567
ZMU05821
21