Safety Precautions - Swann CURING LIGHT Instruction Manual

Curing light
Table of Contents

Advertisement

1. This product is intended for use in hospitals and dental clinics only. The use of the product must
comply with the requirements of the relevant operating specifications and relevant regulations of the
medical department. Users must be professionally trained and qualified as dentists or technicians.
Do not look directly into the light output. Patient, clinician and assistants are always suggested
wearing protectors (safety goggle, face shield...) to avoid crossing infection.
2. The products are reusable:
Prior to each use, place a new barrier sleeve over the curing light Swan. The hygienic barrier sleeve
is customs fitted to the curing light and keeps the surface of the curing light clean. The barrier sleeve
helps prevent cross contamination, helps keep dental composite material from adhering to the
surface of the lens and curing light, and prevent discoloration and corrosion from cleaning solutions.
The curing lights must be cleaned and sanitized with appropriate cleaning and/or sanitizing agents
after each patient. The sleeve is not equipped with the curing light. Please note that the sleeve must
meet the requirements of relevant medical device regulation and it's disposable.
3. During the operation, the light should be aimed straightly at the composite resin to ensure the
effect of solidification.
4. Please use the original light hood and follow the right installation ways to avoid the damage of
blue light to the eyes.
5. Please do not use other than the specified voltage to recharge the battery. Only the original
pedestal charger, adapter and Lithium battery could be used, because other brand pedestal charger,
adapter and Lithium battery are likely to damage the circuit.
6. Please recharge the battery at least 4 hours before first time usage. It's forbidden to connect the
charger to the base for long time while not charging and it's not allowed to use the curing light while
charging.
7. It is forbidden to touch the charging connector with metal or other conductor, to avoiding damage
the circuit of charge or the battery.
8. Please recharge the battery in cool and ventilated room. Please press the main unit to the buckle
of charging base, in order to avoid the poor connection.
9. It is forbidden to self-taking-apart the battery, in order not to result in short-circuit or leakage.
10. It is forbidden to extrude, shake or rock the battery. The Lithium battery is forbidden to be in
short-circuiting situation and it is forbidden to put the battery with metal or other conductors.
11. The instrument has electromagnetic interference. Do not use it around electronic surgery, and
use the instrument with caution in an environment with strong electromagnetic interference.
12. This product does not contain toxic or hazardous substances and it is discarded in accordance
with the relevant laws and regulations on waste medical devices. Please deal with the replaced
battery according to national regulations
13. As a professional manufacturer of medical instruments, we are only responsible for the safety
on the following conditions:
• The maintenance, repair and modification are made by the manufacturer or the authorized dealer.
• The changed components are original of our company and operated correctly according to
instruction manual.
Product contraindications:
The heart disease patient, pregnant woman, children and the person who are allergic to blue light
should be cautious to use this equipment.
Symbol
Warning, Caution and Important!
Check the Instruction Manual
Date of manufacture
According to the type of protection
against electric shock: CLASS II
EQUIPMENT
Screw inside/ outside
Recovery
Handle with care
Temperature limitation for storage
Appliance compliance WEEE directive,
Dispose as required by the law.

Safety Precautions

Symbol instruction
Instruction
Symbol
Consult the accompanying
documents
Manufacturer
According to the degree of
protection against electric
shock:Type B applied part
Used indoor only
Keep dry
Atmospheric pressure for storage
Humidity limitation for storage
CE Mark
2
Instruction

Advertisement

Table of Contents
loading

Table of Contents