Outdoor Electronic Controller Removal Procedure - Panasonic CS-HZ9RKE-1 Service Manual

18.2 Outdoor Electronic Controller Removal Procedure

Caution! When handling electronic controller, be careful of electrostatic discharge.
1. Remove the 5 screws of the Top Panel.
2. Remove the 8 screws of the Front Panel.
3. Remove the screw of the Terminal Board Cover.
4. Remove the Top Cover of the Control Board by
4 hooks.
Fig. 1
Fig. 2
Fig. 3
5. Remove the Control Board as follows:
120
Fig. 4
Fig. 5
Fig. 6