M48295
General Safety Warning
Please make sure that you read and follow
these instructions carefully. Keep these
instructions in a safe place for future reference.
1.
INTENDED USE
Intended to be used in a bathroom or shower, to provide a stable seated surface for clients with reduced
mobility who are unable to stand during showering.
2.
SAFETY
WARNING: The maximum user weight must not be
more than 160Kg (25st).
3.
UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
3.1
Contents:
1.
Seat x 1
2.
Frame x 1
3.
Leg Extension x 4
4.
Stainless Screw x 4
5.
Nylon Washer x 8
USER INSTRUCTIONS
HEIGHT ADJUSTABLE SHOWER CHAIR
Height Adjustable Shower Chair
Maximum User Weight
4.
ASSEMBLY/INSTALLATION
5
1.
Fit the seat to the frame as shown using the
four stainless screws, each fi tted through two nylon
washers and inserted into the seat moulding up
through the frame. Do not over-tighten, hand tight is
suffi cient.
2.
Fit an extension leg onto each frame leg. Adjust
the legs to give the required height for the user (this
should be such that the user's feet sit squarely on
the fl oor with the thighs supported). Ensure the brass
buttons protrude fully through the adjustment holes
in the extension legs.
3.
Place chair in required position and check it
feels stable and secure before use.
5.
MAINTENANCE
Periodically check the stability and rigidity of the
product and, where applicable, that screws are
tightened and in good condition. If you see any
damage or suspect a fault, please contact your
supplier.
1
25st
160kg
1
2
4
5
3
Need help?
Do you have a question about the M48295 and is the answer not in the manual?
Questions and answers