NRS Healthcare Easylift N43541 User Instructions

General safety Warning
Please ensure these instructions are fully read
and implemented. Failure to do so may result
in injury. Retain these instructions in a safe
place for future reference.

1.0 Intended Use

The Easylift Over Bed Table Range provides
users with a firm, flat surface that is suitable for
eating, writing, reading, etc. The single column
construction and adjustable height makes
them suitable for use with most types of beds
and chairs. N43565, N43577, N43589 &
N85195 are also suitable for use with
wheelchairs.

2.0 Safety Precautions

Always ensure that the table is correctly
positioned and adjusted to allow it to be used
safely and comfortably.
Do not lean or sit on the table.
Do not exceed the safe working load of 25kg
evenly distributed.
Do not place hot utensils, crockery etc. directly
on the table surface. Maximum heat resistance
65°C (149°F).
Take care when moving the table over rough or
uneven surfaces. Lift the table over large
ridges and wide gaps.
Take care with tilting table tops not to trap
fingers between fixed and moving parts.
Easylift Over Bed/Chair Table
N43541 Easylift Over Bed Table Beech Top – Standard Base
N43553 Easylift Over Bed Table Beech Top – Standard Base – Low
N43565 Easylift Over Bed/Chair Table – Beech Top – Curved Base
N43577 Easylift Over Bed/Chair Table – Standard Top – Curved Base
N43589 Easylift Over Bed/Chair Table – Tilt Top – Curved Base
N85195 Easylift Over bed/Chair Table – Beech Tilt Top – Curved Base
User Instructions
N43541
N43565
N43589
N43553
N43577
N85195