Impex COMPETITOR CB-610 Owner's Manual page 9

STEP 4 (See Diagram 4)
A.) Attach the hole-side of the Backrest Supports (#22) onto both ends of the Pivot on the
Main Seat Support (#52). The other side rest against the Backrest Adjustment Bar
(#10).
B.) Place the Backrest Board (#18) onto the Backrest Supports. Secure it with four M6 x 1
½" Hex Bolts (#50) and ∅ ½" Washers (#51).
C.) Place the Seat (#19) onto the bracket on the Main Seat Support (#52). Align the holes
and secure it with four M6 x 1 ½" Hex Bolts (#50) and ∅ ½" Washers (#51).
8