Advertisement
2. Preparation
Prepare following equipment and a firmware package prior to update.
Name
SD memory card
Firmware package
(VSI****.zip)
AC adaptor
Computer (PC/Mac)
! Important: Please read before performing update:
For updating, it is necessary to connect Camera module to Recording module.
Update work may take approximately 60 minutes, use secure power supply (AC
adaptor), unexpected shutdown while in update may cause an
unrecoverable failure.
Do NOT eject SD memory card while update is in progress (while access
LED blinks), interrupting communication between SD card and equipment
may cause unrecoverable failure.
3. Updating firmware
[Preparation]
1. Insert an SD memory card into the SD card slot ( NOT microP2 card slot ) on the unit.
2. Format the SD card (MENU : SYSTEM SETTINGS > CARDS/MEDIA > FORMAT CARD > SD CARD)
Visit Panasonic professional video support website <http://panasonic.biz/sav/pass_e> and download
"vsi*****.zip" firmware package.
3. Extract the ZIP package (you will see "PRIVATE" folder).
4. Mount the formatted SD card to the computer then copy the "PRIVATE" folder to the SD card.
Qty
MAX 64GB MIN 256MB
1
Note: microP2 card can also be used as substitution for SD cards but the
card has to be formatted as SD CARD in the SD card slot in advance.
1
Can be downloaded at:
1
1
Needed for downloading, unzipping, copying firmware package
Extract
Firmware update procedure for Varicam series
Remark
http://panasonic.biz/sav/pass_e
Copy to
ROOT
directory
Page2/5
January 2015
Access LED
SD card slot
Advertisement
