Kenwood DDX9904S Instruction Manual page 61

Ñ
Receive a call
1
Touch [ ] to answer a phone call or
] to reject an incoming call.
[
NOTE
• While monitoring the view camera, this screen
does not appear even if a call comes in. To display
this screen, press the [TEL] button or return the
shift knob of car to the driver position.
To end call
1
While talking, touch [
Ñ
Operations during a call
● Adjust the volume of your voice
1) Touch [Speech Quality].
2) Touch [T] or [U] of [Microphone Level].
].
● Adjust the receiver volume
Press the [S] or [R] button.
● Mute your voice
Touch [ ] to mute or not to mute your voice.
● Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
● Switching the speaking voice output
Touching [
]/ [
the speaking voice output between cell-phone
and speaker.
● Call-waiting
When you receive a call while talking on
another call, you can answer the newly
received call by touching [ ]. The current call
is on hold.
Each time you touch [ ], the caller will change.
When you touch [ ], the current call will end
and switch to the call in hold.
● [×]
The Hands-Free popup screen is closed. To
display it again, touch [
Bluetooth Control
] each time switches
].
English
61