Assembly Instructions - Nova Caddy X9RD User Manual

2. Assembly Instructions

Please read and follow these instructions carefully, and you will be ready to go in a few minutes.
1.Unpack all items carefully and check everything has been included. Some extras may be in
small packages so do not throw anything away until all has been checked.
2. Place the frame structure (one piece) on soft and clean floor and ensure you do not scratch
the frame on a hard surface.
3. Fit the rear wheel by pushing the wheel lock button (pic 2) on the outside of the wheel while
inserting the wheel onto the axle. Push the wheel all the way in so that the axle sprocket fit into
the wheel to engage the clutch and release the wheel lock button. The wheel should be fully
secured. If not locked in, the wheel will not be connected to the clutch and will not be
propelled!!! Test the lock by trying to pull the wheel out. To disassemble the wheels proceed in
reverse order. If you feel the wheels are not working then take them off – switch the power on
and if the axle rotates you will know you have not pushed the wheels all the way in.
Pic 2 Pic 3
4. Erect the middle frame (pic 4) and tighten the Lower Folding Locking Knob (pic 5) (make
sure the middle frame is straight up, so the locking screw line up with the threaded insert).
Unfolding the up frame and adjust the handle to you prefer height and tighten Upper Folding
Locking Knob (pic 6).
5