Table of Contents
Advertisement
3. Attach gas line to fireplace gas regulator.
See Connecting to Gas Supply, page 14.
4. Check all gas connections for leaks. See
Checking Gas Connections, page 16.
IMPORTANT: When finishing your firebox,
combustible materials such as wall board,
gypsum board, sheet rock, drywall, plywood,
etc, must have 1/2" clearance to the sides
and top of the firebox. Combustible materials
should never overlap the firebox front facing.
If using a cabinet mantel, assemble following the instructions included with
the mantel at this time.
Note: Some mantels are designed with physical and chemical distress to
enhance the realistic appearance of the wood.
1. Carefully push the fireplace insert into
the mantel from the front as shown in
Figure 10.
2. Position the fireplace against the wall in
the desired location.
200200-01C
INSTALLATION
CABINET MANTEL
Figure 10 - Installing Fireplace Insert Into
www.factorybuysdirect.com
90°
15
36
Figure 9 - Rough Opening for Corner
Installation
Mantel
/
"
5
8
/
"
1
2
13
Advertisement
Table of Contents
