2.4. Rack and Speed Dome Installation
2.4.1. Installation Requirements
1. Installation should be handled by a qualified service agent and should comply with
all local regulations. Service personnel should expect potential problems such as
surface strength, surface material, falling objects, outer breaches, building vibration
or other similar conditions.
2. Check for all necessary materials, and ensure if the selected installation location is
suitable for the EPTZ1000.
2.4.2. EPTZ1000 Dome Camera Wall Mount Installation
Notice: Installation location that is a wall, pole or a ceiling need to support above five times
the total weight of the camera assembly (dome camera and bracket) to avoid shaken
images, and dropping.
1. Set wall mount bracket on the wall. Mark the center of the holes on the wall against
the bracket holes. Use a drill to make 4 M8 size holes at the marks, and nail in 4 M8
screws.
2-16