Initial Settings - JVC LT-42DA8BJ Instructions Manual

Initial settings

Register digital / analogue channels on TV. These channels can be edited later.
(In this manual, digital terrestrial broadcasting is indicated as digital channels,
analogue terrestrial broadcasting and analogue cable TV as analogue channels.)
 To the previous screen

 Exit

 If the "JVC" logo does not appear or if you
wish to make changes later
Digital channel settings : "Configuration" (P. 39)

"Installation" (P. 43)
Analogue channel settings : "SET UP" (P. 34)
What is "T-V LINK"?
Connecting the TV to a "T-V LINK"
compatible device allows :
Analogue channels to be instantly

registered on the device.
The "DIRECT REC" function to be

used.
"Technical information" (P. 54)

 "T-V LINK" variations
"T-V LINK" (JVC) "Q-LINK" (Panasonic)
"Megalogic" (Grundig) "Data Logic" (Metz)
"SMARTLINK" (Sony) "Easy Link" (Philips)
11
TV/DTV
BACK
1
Begin
Shown only when powering on for the first time.

The power button on the unit can also be used.

2
Set digital channels
1
Confirm "English" is set
First Time Installation > Language Setting
Step 1: Please choose language
Language
English
2
Confirm "United Kingdom" is set
First Time Installation > Country Setting
Step 2: Please choose country
Country
United Kingdom
3
Set the aerial power supply
Start Channel
Stop Channel
Antenna Power Mode
On Start Scan Off
4
Scan digital channels
First Time Installation > Service Scan
Step 3: Please press OK
Service Scan Automatic
_ _
Start Channel
Stop Channel _ _
Mode Add
Start Scan
5
Register digital channels
_ _
Stop Channel
Teema
Teema
Scan completed! Store services? Mode Add
Teema
Yes Start Scan No
 If digital channels are not found, the following message will appear.
No services found!
OK
After completing following steps, read "When the TV cannot find the digital

channels" (P. 14) and try scanning digital channels again
 The remote control
doesn't work
Confirm the mode is set to

"TV".
Language for on-screen

displays when watching digital
channel including the DTV
menu.
This TV can only receive

British digital channels.
_ _
1 select
_ _ Only when using an aerial which

Ad d
needs external power, select "On".
 "Power supply for the indoor
aerial" (P. 55)
2 next
First Time Installation > Service Scan
Step 3: Please press OK
Service Scan Automatic
_ _
BBC ONE Start Channel
BBC TWO
Stop Channel _ _
BBC THREE
Mode Add
Start Scan
UHF33 : 3 Services found
!
(Next page)

12