Dtv Setup - JVC LT-42DA8BJ Instructions Manual

DTV setup

Available for setting power supply for the aerial, and upgrading the tuner
software, etc.
1
Switch to digital channels
2
Display the menu
3
Select "DTV"
4
Select "Setup"
 To the previous 5
Select an item
screen

 Exit

6
Finish
41
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
DTV
2 next
1 select
DTV Menu
Timer
Edit PR
Configuration
Setup
Installation
2 next
select
Setup 14:00 05/05/2006
Digital Audio Output PCM
Banner Duration 2 sec
Receiver Upgrade Auto
Common Interface No CI Module
Antenna Power Off
Output the
Dolby Digital PCM
signal
Digital Audio Output
Please read ""Dolby Digital" output from the "DIGITAL AUDIO OUT" terminal" (P. 56) before setting.

You can upgrade the tuner software as newer versions become available. Normally set to "Auto".
Auto
 When JVC or the broadcasting station informs you of the new software, download it as follows.
1 Select "Manual"
Upgrade
tuner
Manual
Receiver Upgrade
Enter PIN code if needed.

3 Select "Yes"
New software found.
Would you like to upgrade now?
Yes In standby
 If the TV has upgrade to the latest tuner software, the message "Search completed. No new software found
Select "In standby" instead of "Yes" if you want to upgrade the software automatically when the TV is turned off.

To watch pay-TV digital channels, use the Conditional Access Module menu.
This function can only be used when pay-TV can be received in your region.
Set
No CI Module
Conditional
Access
Module
1 Press "OK" button to display the
Conditional Access Module menu
Common Interface
The content of the menu is different depending on the broadcasting company.

For details, consult your broadcasting company

The language shown in the menu may differ to the "Language" set for the TV.

Power supply
for the indoor Off
aerial
Antenna Power
 Please read "Power supply for the indoor aerial" (P. 55) before setting.
Banner Duration: Select the display time for channel information (2 sec / 5 sec / 8 sec).

PCM Dolby Digital
: The Linear PCM : The Dolby Digital
signal is output signal is output
Only when the Dolby Digital signal is received

Auto
: Automatically download and : Manually download and
install software upgrades install software upgrades
This occurs at midnight when
 
the TV's power is off.
2 Select "Search for new"
1 select
Software Version
OK
2 next
If upgrading is not necessary,

select "OK" to finish.
1 select
Downloading new software
No Cancel
2 next
When the Conditional Access Module etc. is
No CI Module 
inserted after subscribing to the broadcasting
: Function is not
available company, this function is available.
"Watch pay-TV digital channels" (P. 8)

2 Follow the instructions on the
screen to set up pay-TV
Off On
: Power not : Power supplied
supplied
Manual
When you change the setting,
enter PIN code.
1 select
2.14.03
Search for new
2 start
"Software upgraded
successfully! TV will
now reset!".
"
will appear.
42