Changing Modes - Delta Children First Steps 3-in-1 Sit-to-Stand Instruction Manual

1

CHANGING MODES

• Locate walker wheels (Fig. 1).
• To convert to walker mode: Pull wheels away from housing in direction
of arrow, then fold up (Fig. 2),
• Secure by pushing into socket as shown (Fig. 2A).
INCREASE HEIGHT
1
ADJUSTING WALKER HEIGHT
• To increase walker height: Press in height adjustment button
• While button is pressed, adjust height by pulling up on the top of the leg
housing
• Repeat on all 4 walker legs until set at the same height.
Customer Service
gcs@DeltaChildren.com
CHANGING MODES
Fig. 1
ADJUSTING WALKER HEIGHT
Fig. 2
Fig. 3
• To convert to bouncer / activity center: Pull wheels up out of
housing in direction of arrow, then fold down (Fig. 3).
• Secure by pushing into socket as shown (Fig. 3A).
• To decrease walker height: Press in height adjustment button
• While button is pressed, decrease height by pushing down on the top of the
leg housing
• Repeat on all 4 walker legs until set at the same height.
11
Fig. 2A
Fig. 3A
DECREASE HEIGHT
www.DeltaChildren.com