Technical Data; Definitions: Safety Guidelines - DeWalt DCD720 Original Instructions Manual

CORDLESS RIGHT ANGLE DRILL/DRIVER
DCD720, DCD740
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No load speed
1st gear
2nd gear
Chuck capacity
Maximum drilling capacity
Wood
Metal
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a
h
Drilling into metal
Vibration emission value a =
h D
Uncertainty K =
Vibration emission value a
h
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
WALT one of the
e
DCD720 DCD740
V 14.4 18
DC
1 1
Li‑Ion Li‑Ion
W 300 360
min‑1 0–650 0–650
min‑1 0–2000 0–2000
mm 10 10
mm 28 28
mm 10 10
kg 1.3 1.3
dB(A) 76 76
dB(A) 87 87
dB(A) 3 3
m/s 2 3.5 3.5
m/s 2 1.5 1.5
m/s < 2.5 < 2.5
2
m/s 1.5 1.5
2
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
Right‑Angle Drill
DCD720, DCD740
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009 +A11:2010, EN60745‑2‑1:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
D‑65510, Idstein, Germany
16.06.2011
a
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
English
WALT at
e
WALT.
e
3