Emerson XR75CX Installation And Operation Manual page 35

Label
doA Door open alarm delay
nPS Number of activation of pressure switch
Odc Compress status when open door
rrd Regulation restart with door open alarm
HES Differential for Energy Saving
Hur* Current hour
Min* Current minute
dAY* Current day
Hd1* First weekly holiday
Hd2* Second weekly holiday
ILE* Energy Saving cycle start during workdays
dLE* Energy Saving cycle length during workdays
ISE* Energy Saving cycle start on holidays
dSE* Energy Saving cycle length on holidays
Ld1*
st
1 workdays defrost start
Ld2*
nd
2 workdays defrost start
Ld3* rd
3 workdays defrost start
Ld4*
th
4 workdays defrost start
Ld5*
th
5 workdays defrost start
Ld6* th
6 workdays defrost start
Sd1*
st
1 holiday defrost start
Sd2*
nd
2 holiday defrost start
Sd3*
rd
3 holiday defrost start
Sd4*
th
4 holiday defrost start
Sd5* th
5 holiday defrost start
Sd6*
th
6 holiday defrost start
Adr Serial address
pbC Kind of probe
onF ON/OFF key enabling
dP1 Room probe display
dP2 Evaporator probe display
dP3 Third probe display
dP4 Fourth probe display
rSE Real set
rEL Software release
Ptb Map code
Table 19-1 - Default Setting Values (
MODBUS Termination Blocks
Name
*
Only for models with real time clock (RTC),
Range
0 to 255 min
0 to 15
no; Fan; CPr; F_C
n – Y
(-30°C to 30°C) (-54°F to 54°F)
0 to 23
0 to 59
Sun to SAt
Sun to SAt – not used
Sun to SAt – not used
0 to 23 hr 50 min
0 to 24 hr 00 min
0 to 23 hr 50 min
0 to 24 hr 00 min
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min. - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
0 to 23 hr 50 min - not used
1 to 247
Pt1000; ntc
not used, oFF; ES
--
--
--
--
actual set
--
--
2
Only for XR75CX with X-REP output)
Value Level
15 Pr1
15 Pr2
F-C Pr2
y Pr2
0 Pr2
- Pr1
- Pr1
- Pr1
not used Pr1
not used Pr1
0.0 Pr1
0 Pr1
0.0 Pr1
0 Pr1
6.0 Pr1
13.0 Pr1
21.0 Pr1
not used Pr1
not used Pr1
not used Pr1
6.0 Pr1
13.0 Pr1
21.0 Pr1
not used Pr1
not used Pr1
not used Pr1
1 Pr2
ntc Pr2
not used Pr2
- Pr1
- Pr1
- Pr1
- Pr1
- Pr2
2.6 Pr2
- Pr2
Default Setting Values • 29