Motorola MICOM-3F Service Manual page 24

6. Use a static safeguarded workstation, which can be accomplished through the use of an anti-
static kit (for example, Motorola part number 0180386A82). This kit includes a wrist strap,
two ground cords, a static-control table mat and a static-control floor mat.
When these items are not readily available, observing the following techniques will minimize
chance of damage:
•
If a static-sensitive device is to be temporarily set down, use a conductive surface for
placement of the device.
•
Make skin contact with a conductive work surface first and maintain this contact when
the device is set down or picked up.
7. Always wear a conductive strap when servicing this equipment. The Motorola part number for
a replacement wrist strap that connects to the table mat is 42-80385A58.
8. When straightening CMOS pins, provide ground straps for apparatus used.
9. When soldering, use a grounded soldering iron.
1-6
6886859J01
Cat. No.