Table of Contents
Advertisement
Available languages
Available languages
24 • ENGLISH
PROBLEM
Unitwill not start.
Battery packwill not charge.
Unit shuts off abruptly.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com
TROUBLESHOOTING
POSSIBLE CAUSE
Battery pack not installed properly
Battery pack not charged
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too
hot or too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life
of the battery pack it is designed to
shut off abruptly when the charge
is depleted.)
POSSIBLE SOLUTION
Check battery pack installation.
Check battery pack charging
requirements.
Insert battery pack into charger until
green LED appears.
Plug charger into aworking outlet.
Refer to "Important ChargingNotes"
formore details.
Move charger and battery pack to a
surrounding air temperature
of above 40 oF (4.5°C) or
below 105 oF (+40.5°C).
Allow battery pack to cool down.
Place on charger and allow
to charge.
Advertisement
Table of Contents
